Hi,
just had a quick look at the latest BM 4400 I've acquired. Generally it looks OK but I've noticed that the tuner needs re-stringing.
The string is intact but no longer passes through the wheels/pulley.
I also notice there is a spring which was attached to something that has broken off.
Does anyone have expertise in this area and can offer advice?
It's the kind of mechanical fiddlyness that I know I'm terrible at, I do like to have a go though.
Thanks in advance!
Steve
A trawl of 4400 manuals has led me to believe that “Diagram (3955001)” and diagram “Dial cord (6271101)” are missing - if anyone has a complete manual I would be extremely grateful - cheers!
About to start my 2nd Beomaster 4400 restoration - need tuner restring advice
5 replies
Found this on here, not sure how I missed it before - sounds pretty reasonable:
Take off the top cover, the tuning slider has some pins glued to the tuning string, probably the glue let loose or the pins are broken, or worst case the string is broken, If the string is broken, you will need a new one, If not, tune in to a known station, set the slider exactly to the stations Mhz, with epoxy or a strong glue attach the slider to the string.
I thought there was a manual in the products section for the 4400....however when I look I can no longer find it? as I recall it gives the details required to replace the tuner string, I think I have one somewhere and will have a look for you.
Craig
Hi Craig,
thanks for the message - would be super-grateful if you can find it.
Cheers!
Steve
I found a copy of the service manual on the Kose trading site (hopefully attached below), but it should be on Beoworld also - I will check with Multicare.
Location: Warwickshire, UK
My B&O Icons:
Post a Reply
Attach Files
Max 10MB per file. Images, videos, PDFs, documents, archives, and 3D models accepted.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.