Beovision 10-32 Stuck on Setup

2 replies

B&O Orlando

Bronze

Posted January 14, 2026 at 22:59 GMT

Hi all, I have a Beovision 10-32 from Denmark that I am using in USA. When going through first time setup, I cannot pass the section where you setup and search for TV stations. If I select none of the options, I cannot continue, and if I select any of the options it searches for channels, finds none, and then I still cannot continue. I find it hard to believe that I MUST tune TV stations to finish the setup. I can still use the TV as I can switch to an HDMI input, but whenever I turn it on it initially wants me to go through the setup. Any ideas?

Location: Winter Park, FL

My B&O Icons:

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beolab 8

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beolab 18

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beolab 28

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beolab 50

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beolab 90

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoplay A1

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoplay A9

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoplay H95

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoplay H100

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoremote Halo

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beoremote One

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound 2

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Balance

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Edge

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Emerge

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Explore

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Level

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Shape

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Stage

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beosound Theatre

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beovision Contour

Https://Beoworld.Org/Wp Content/Uploads/2025/01/Beovision Harmony

Guy

GoldModerator

Posted January 15, 2026 at 12:40 GMT

#31442

Can you get into the 'Options' menu and turn off the Tuners? Both analogue and DVB-HD if there. Alternatively, try going to the Service menu* and find the option 'RESET TO FACTORY SETTINGS'. Then try setup again. * The Service Menu must be activated while the TV SETUP menu is displayed. From this initial state, the Service Menu is activated in the following way: Beo4: the Service Menu is activated by pressing 0 0 GO within 3 s.

Location: Warwickshire, UK

My B&O Icons: